HO Scale Model Railroad Item 1/87th Scale Intended as an Adult Display Model - for Ages Over 18<></> Mint Condition MTH HO Scale FACTORY INSTALLED DCC / DCS & SOUND DUAL MODE OPERATION DC Analog or DCC Digital VERANDA GAS TURBINE and TENDER Locomotive UNION PACIFIC Armour Yellow and Harbor Mist Gray color Scheme 
Cab # 66 Cab numbers in photo may vary NEW ITEM MINT IN THE BOX THIS IS NEW IN THE FACTORY BOX IT HAS NOT BEEN ON A LAYOUT AND HAS BEEN IN OUR WAREHOUSE NEVER ON DISPLAY YOU WILL BE THE FIRST TO OPEN THE BOX. ************************************************************************************************ CAB # 66 
STOCK MANUFACTURER'S PHOTOS ALL BOXES ARE UNOPENED NOT EVEN FOR THE PICTURE **************************************************************************************************** | M.T.H. introduces the UP Veranda Turbine with more features than any other model of this massive locomotive: variable intensity smoke; a broad range of sounds, from the turbine itself to crew conversations; remotely controlled couplers on the locomotive; operating Mars light; built-in decoder to ensure full compatibility with all NMRA-standard DCC systems; and die-cast metal construction, twin flywheel-equipped motors, and four traction tires to provide pulling power that rivals the prototype.
Add the brute strength of the Veranda Turbine to your roster and assign it to your heaviest freight consists as the UP did. Operate the locomotive alone as it was originally delivered in 1954, or with the fuel tender added a year later.
The prototype turbines were the 1950s manifestation of the Union Pacific's ongoing love affair with massive, larger-than-life locomotives - a family line of giant UP power that began with the 9000-class 4-12-2 steamers, continued with the Challengers, Big Boys, and gas turbines, and ended with the DDA40X Centennial diesels. More than many other roads, the UP also loved to experiment - witness its early-1900s sponsorship of the McKeen car, a cross between a torpedo boat and a passenger car. In that context, the UP's ownership of the world's only significant fleet of gas turbines, basically turbojet engines on wheels, seems only natural.
In the late 1940s, even as it was building diesels in partnership with Alco, General Electric was experimenting with ways to apply its aircraft jet engine technology to railroading. Its gas turbine electric (GTEL) was basically a diesel engine with a large turbine replacing the diesel as the prime mover. In a turbine, intake air is compressed by spinning turbine blades and fed into combustion chambers, where fuel is added and ignited, as in a jet engine. The hot exhaust gases spin the blades of another turbine that powers one or more generators, which produce electricity to power diesel-type traction motors. Compared with diesels of the period, GE's GTEL put three times as much power (4500hp) in one locomotive, had significantly fewer moving parts, and did not vibrate like a diesel. The major drawback was a voracious appetite for fuel.
After two years of testing GE's prototype, the Union Pacific ordered its first ten GTELs in 1951. The engines were designed to burn Bunker C oil, a byproduct of petroleum distillation that was almost considered waste material. The low cost of Bunker C more than compensated for the turbines' high consumption, although the oil was so thick it had to be heated to 240 degrees Fahrenheit to flow though the fuel system.
The new turbines, nicknamed "Big Blows" for their jet-like sound, were assigned mainly to the UP's 992-mile division from Council Bluffs, Iowa to Ogden, Utah. Almost immediately, they were hauling nearly 10% of the road's total freight shipments. The turbines were so successful that an order for 15 second-generation engines was placed even before the entire first order had been received.
Delivered in 1954 and numbered 61-75, the new engines were nicknamed "Verandas" for their outside walkways, which allowed the crew to avoid walking through a noisy engine room. Other differences from the first-generation turbines included dynamic brakes and air intakes on the roof, rather than the carbody sides. Nearly the entire floor of the engines was a massive 7500-gallon fuel tank, which gave a range of about 400 miles. In 1955, the addition of fuel tenders rebuilt from scrapped 9000-class steamers enabled the turbines to cover the entire division without refueling. Most of the GTELs were later equipped to run in multiple units with diesels; GP9s, some of which had also been retrofitted to run on Bunker C, were most commonly allied with turbines.
By the early 1960s, however, the turbines' use of Bunker C fuel had changed from an advantage to a problem. The plastics industry had found new uses for the former waste product and its price skyrocketed. At the same time, the corrosive nature of the fuel led many of the turbines to develop engine problems. The Verandas were retired in 1963-64 in favor of newer 8500hp Big Blows, and the UP's entire turbine program was finished by 1970.
FEATURES Features - Detailed Die-Cast Locomotive & Tender Bodies
- Die-Cast Metal Chassis
- Authentic Paint Scheme & Cab Numbers
- RP-25 Metal Wheels Mounted On Metal Axles
- Constant Voltage, Directional Headlights
- Prototypical Rule 17 Lighting
- Detailed Truck Sides
- Detailed Cab Interior
- (2) Powerful 12-Volt 5-Pole Precision Skew-Wound Flywheel Equipped Motors
- (2) Scale Kadee Compatible Remotely Controlled Proto-Couplers On Locomotive
- (2) User-Installed Kadee Compatible Magnetic Couplers
- Detailed Handrails and Decorative Bell
- Decorative Detailed Horn
- Operating ProtoSmoke® System
- Locomotive Speed Control In Scale MPH Increments
- On-Board DCC Receiver
- Operates On Code 70, 83, & 100 Rail Curves
Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time. When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible: - F0 Headlight
- F1 Bell
- F2 Horn
- F3 Start-up/Shut-down
- F4 PFA
- F5 Lights (Ditch and Number Board)
- F6 Master Volume
- F7 Front Coupler
- F8 Rear Coupler
- F9 Forward Signal
- F10 Reverse Signal
- F11 Smoke On/Off
- F12 Smoke Volume
- F13 Grade Crossing
- F14 Coupler Slack
- F15 Extended Start-up
- F16 Extended Shut-down
- F17 Rev Up
- F18 Rev Down
- F19 Engine Sounds (On/Off)
- F20 Single Horn Blast
- F21 Coupler Close
- F22 Feature Reset
- F23 Idle Sequence 1
- F24 Idle Sequence 2
- F25 Idle Sequence 3
- F26 One Shot Doppler (On/Off)
- F27 Brake Sounds (On/Off)
- F28 Cab Chatter (On/Off)
THIS IS AN ADULT COLLECTIBLE ITEM NOT INTENDED FOR CHILDREN |
GET IT FAST -- NEXT DAY SERVICE MUST BE PAID FOR BY 10:00 am Central Standard Time to be able to make the NEXT DAY AIR TRUCK. Payments after 10 am would not be able to be picked up for shipment until the next business day. If you wish Next Day shipment please call our Retail Store at (320) 283-5850 so arrangements can be made and the delivery address can be confirmed for shipment 
QUESTIONS: Please email with any questions before bidding. We do combine shipping on multiple items. Contact me for details on combined shipping. The more you buy the more you save on shipping. Combined Orders:You must use the "request total" button when you are finished with your purchases. This will let us know that you are ready to pay. We will then package your items, get a final weight, and then send you an invoice for the combined total with SHIPPING COST. Please allow time for us to package your items before we send your invoice, usually just a few hours. Invoices are automatically sent to the email address associated with your eBay account. Sometimes, they can end up in your junk-mail folder, so make sure to always double check there. . RETURNS: All items unless stated otherwise are Sold As Is. ALL SALES are FINAL. No returns are accepted without a Return Goods Authorization Number (RGA) issued at the sole discretion of the seller. Outbound shipping and shipping return charges and cost are not refundable and the responsibility of the buyer. Items must be returned in the original package. Package must be unopened still in the sealed shrink-wrap and in original resalable condition - Additional return policy details: ALL SALES are FINAL. No returns are accepted without a Return Goods Authorization Number (RGA) issued at the sole discretion of the seller. Outbound shipping and shipping return charges and cost are not refundable and the responsibility of the buyer. Items must be returned in the original package. Package must be unopened still in the sealed shrink-wrap and in original resalable condition.
- LOCOMOTIVE SPECIAL CONDITIONS: This unit has an odometer and an hour meter on it for return both the odometer and the hour meter must read zero.
- For MTH items If the unit is run then normal factory warranty would apply and MTH would directly handle any warranty issues.
- On New power units Factory Warrantees apply and are handled directly by the manufacturer under the terms of their warranty agreement.
SHIPPING: SHIPPING is done Monday thru Friday normally within 1 day of receiving payment. Sometime a delay does occur due to weather or the commercial carriers we use to deliver the packages. All customers receive an email notifying they of the scheduled delivery date at the time of shipping along with the tracking number of the package. FREE SHIPPING: FREE SHIPPING ONLY applies to packages shipped domestically within the continental United States. Shipping outside the 48 states pay quoted shipping costs. IF YOU ELECT THE FREE SHIPPING OPTION YOU UNDERSTAND AND AGREE THAT WE SHALL SELECT THE METHOD OF SHIPMENT FOR THE ITEM OR ITEMS NORMALLY FIRST CLASS MAIL. IF YOU DESIRE A MORE RAPID METHOD OF SHIPMENT YOU MUST SELECT AND PAY THE APPROPRIATE FARE YOURSELF. INTERNATIONAL SHIPPING: INTERNATIONAL customers pay quoted shipping cost based on the service class desired and the Destination. International, Canadian, Australian, German, Japanese and United Kingdom Buyers MUST pay by Paypal and MUST Provide a Telephone Number for the customs form. INTERNATIONAL, Canadian, Australian, German, Japanese and United Kingdom Buyers pay all actual shipping costs and fees plus a 5.00 USD handling fee. NOTICE TO INTERNATIONAL BUYERS-THIS ITEM WILL BE SHIPPED USPS INTERNATIONAL PRIORITY ONLY! IMPORT DUTIES, TAXES, & CHARGES(typically collected upon delivery or pickup) ARE THE BUYER'S RESPONSIBILITY AND ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE PRIOR TO BIDDING/BUYING TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE. CUSTOMER SERVICE CONTACT : SHOULD THERE BE A PROBLEM WITH YOUR ORDER OR SHOULD THERE BE SHIPMENT DAMAGE PLEASE CONTACT OUR CUSTOMER SERVICE STAFF TO ASSIST YOU. Advanced Model Railroad & Hobby Supply Telephone (320) 283-5850 |
Home |
About Us |
Policies |
Service |
Search | View Cart
